Network Router User Manual

2-6
Cisco Media Gateway Manager User Guide
78-11705-02
Chapter 2 Installation
Installing the Cisco MGM Server
If you do not update the server etc/hosts file, the warning dialog box and error message shown in
Figure 2-3 will appear when you attempt to login to Cisco MGM from the client machine:
Figure 2-3 Cisco MGM Login Warning Dialog
After you modify the /etc/hosts file, enter the following commands to restart the Cisco MGM server:
cd /opt/cemf/bin
./cemf shell
./cemf stop
./cemf start
Note Wait until Cisco EMF stops before executing the cemf start command.
Configuring the Client /etc/hosts File
Modify the client /etc/hosts file by adding the IP address and name of the server machine. Following is
an example of the client hosts file before and after the modification:
Before:
CEMF Client> more /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
172.29.51.164 cmgm-client loghost
After:
CEMF Client> more /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
172.29.51.164 cmgm-client loghost
172.29.51.179 cmgm-server
Installing the Cisco MGM Server
Installing the Cisco MGM server software requires the following procedures:
1. Installing the Cisco EMF server software
2. Configuring raw partitions
3. Backing up the Cisco EMF database
4. Installing the Cisco MGM server software