- Cisco ASR 901 Series Manual

12-26

Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide

OL-23826-09

Chapter 12 Configuring Resilient Ethernet Protocol

Configuration Examples for REP

Admin-vlan: 100

Preempt Delay Timer: disabled

Load-balancing block port: none

Load-balancing block vlan: none

STCN Propagate to: none

LSL PDU rx: 3322, tx: 1722

HFL PDU rx: 32, tx: 5

BPA TLV rx: 16849, tx: 508

BPA (STCN, LSL) TLV rx: 0, tx: 0

BPA (STCN, HFL) TLV rx: 0, tx: 0

EPA-ELECTION TLV rx: 118, tx: 118

EPA-COMMAND TLV rx: 0, tx: 0

EPA-INFO TLV rx: 4214, tx: 4190

Cisco ASR 901 Topology Example

The following configuration example shows two Cisco ASR 901 routers and two Cisco 7600 series

routers using a REP ring.

Note This section provides partial configurations intended to demonstrate a specific feature.

ASR_1

interface GigabitEthernet0/0

service instance 1 ethernet

encapsulation dot1q 1