Universal Gateway Quick Start Guide

To install a DFC, follow these steps:

Step 1 Attach an ESD-preventive wrist strap.

Step 2 Slide the DFC into the slot until the connector pins make contact with the carrier card backplane connector.

Installing a DFC in a Cisco AS5350

Installing a DFC in a Cisco AS5400

Step 3 Align the captive screws with their holes, and seat the card completely.

Step 4 Tighten the screws to secure the DFC to the chassis.

Tighten the Captive Screws on the Cisco AS5350

36816

ACT

2 PRI

37165

36817

ACT

2 PRI

Carrier

card

DFC

Captive

screw

Captive

screw

Chassis