Universal Gateway Quick Start Guide

Items Included with Cisco AS5350 and Cisco AS5400 Universal Gateways

• 19- and 24-inch rack-mount kits

• Rubber feet for desktop installation

• RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)

• RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)

• RJ-45-to-DB-25 male DCE adapter (labeled MODEM)

• RJ-45-to-RJ-45 rollover console cable

• ESD-preventive wrist strap

• Nylon cable ties

• Cable tie holder

• Grounding lug

• Cisco Information and CD-ROM Package

Items Not Included

Individual items in this list may be required for your particular application:

• Straight-through RJ-45-to-RJ-45 cable for an Ethernet connection

• Straight-through RJ-45-to-RJ-45 cables for T1 connections

• E1 cables for E1 connections

• Ethernet hub or PC with a network interface card for Ethernet LAN connections

• PC running terminal emulation software for local administrative access

• Modem for remote administrative access

• One breakout cable consisting of a 36-pin connector connected to eight RJ-45 adapters for CT1/CE1 connections

• 75-ohm coaxial cable for a CT3 connection

2 Install Chassis

Note The information in this document applies to the Cisco AS5350, Cisco AS5400, and Cisco AS5400HPX universal

gateways.

Note Unless specifically noted, all references to the Cisco AS5400 also apply to the Cisco AS5400HPX.

Safety Information

Warning

For safety information you need to know before working on your Cisco universal gateway, see the Regulatory

Compliance and Safety Information document that accompanied this device.