- Cisco TV Antenna User's Manual

Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R)

78-20770-01

Installing the Antenna

You can install the antenna on any flat vertical surface, on a pole, or on a ceiling. All hardware for

mounting the antenna on a wall or ceiling is provided. If you intend to install your antenna on another

surface, you must provide the appropriate hardware.

Tools and Equipment Required

A mounting installation kit is included with the antenna and consists of the following hardware:

• Mount interface bracket

• Mount base

• Wall bracket

• One 1/4–20 x ½-in. cap screw

• One 1/4–20 wing screw

• Two #10 x ¾-in. screws

• Two #10 x ½-in. screws

• One screen mesh washer

• One spherical washer

• 3/16 allen wrench

• Rubber gasket

• Jam nut

You may need the following tools and equipment, which are not provided.

• A #2 Phillips screwdriver

• A drill and drill bit

• A pencil

• Two hose clamps