user manual

Setup requirementsDescriptionAccessibility feature
Standard on all phones; no set up
is required.
For audible notification of the
phone state, users can:
•
Toggle the Mute and Speaker
buttons on and off to indicate
the state of the phone.
•
Use the Mute button to toggle
the microphone on or off.
When the microphone is
muted, the button is lit.
•
Use the Speaker button to
toggle the speakerphone on
or off. When the
speakerphone is on, the
button is lit.
Audible notification of phone state
Standard on all phones.
Configuration is required.
Phones can send a line-specific
stutter dial tone when a voice
message is waiting on the phone.
Users hear it only when using the
line with the waiting messages.
When the user goes off hook (on
the line for which a voice message
has been left), the stutter dial tone
is heard. Users can change the
audible voice-message indicator
setting by logging in to their Cisco
Unified Communications Self Care
Portal and changing the audible
message-indicator setting to On
or Off.
Audible Message Waiting Indicator
(AMWI)
Standard on all phones; no set up
is required.
Cisco DX650 keypad provides
standard key layout, which enables
users to use existing or familiar key
positions (including a nib on Key
5).
Standard 12-key layout and
grouping of functions
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
110 OL-28931-01
Accessibility
Vision-impaired and blind accessibility features