- Cisco 5700 Series Wireless Controller Manual

19
Cisco 5700 Series Wireless Controller Installation Guide
OL-28544-01
Unpacking and Installing the Controller
Mounting the Controller in a Rack
After the brackets are attached to the controller, use the supplied Phillips machine screws to attach the
brackets to the rack (Figure 5). Use the black Phillips machine screw to attach the cable guide to the left
or right bracket.
Figure 5 Mounting the Controller in a Rack
Table- or Shelf-Mounting
To install the controller on a table or shelf, locate the adhesive strip with the rubber feet in the
mounting-kit envelope. Attach the four rubber feet to the recessed areas on the bottom of the chassis (see
Figure 6).
Figure 6 Attaching the Adhesive Pads for Table- or Shelf-Mounting
1 Phillips machine screw, black 3 Front-mounting position
2 Cable guide 4 Number-12 or number-10 Phillips machine
screws
ACT
V
Cisco 5700 Series Wireless Controller
Model 5760
4
2
1
3
345726
1 Adhesive pads
1
1
345728
PWR-C1-715WAC
CONSOLE
MGMT