- Cisco 5700 Series Wireless Controller Manual

11
Cisco 5700 Series Wireless Controller Installation Guide
OL-28544-01
Unpacking and Installing the Controller
Box Contents
Note Verify that you have received these items. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions.
Required Tools and Information
You will need the following equipment to install the controller:
• Wireless LAN controller hardware
– Controller with factory-supplied power cord and mounting hardware
– Network, operating system service network, and access point cables as required
• Command-line interface (CLI) console
1 Cisco 5700 Series Wireless Controller (power
supply and fan modules not shown)
1
1. Fan modules are installed in the controller. Power supply modules are not installed in the controller.
8 Four number-10 pan-head screws
2 AC power cord 9 Eight number-8 Phillips flat-head screws
3 Four rubber mounting feet 10 Cable guide
4 Ground lug ring terminal 11 M4.0 x 20mm Phillips pan-head screw
5 Two 19-inch mounting brackets 12 (Optional) RJ-45 console cable
2
2. Item is orderable.
6 One number-10 pan-head screw 13 (Optional) USB console cable
2
7 Four number-12 pan-head screws 14 (Optional) StackWise cable (0.5-meter, 1-meter, or 3-meter)
2
ACTV
Cisco 5700 Series Wireless Controller
Model 5760
6
7
8
9
4
14
10
11
2
13
3
12
5
1
345939