- Cisco ONS 15454 Manual

Contents
ix
Cisco ONS 15454 Installation and Operations Guide
November 2001
Procedure: Add a UPSR Node 5-34
Procedure: Remove a UPSR Node 5-35
5.4 Subtending Rings 5-36
Procedure: Subtend a UPSR from a BLSR 5-38
Procedure: Subtend a BLSR from a UPSR 5-38
Procedure: Subtend a BLSR from a BLSR 5-40
5.5 Linear ADM Configurations 5-41
Procedure: Create a Linear ADM 5-42
Procedure: Convert a Linear ADM to UPSR 5-42
Procedure: Convert a Linear ADM to a BLSR 5-47
5.6 Path-Protected Mesh Networks 5-50
CHAPTER 6 Circuits and Tunnels 6-1
6.1 Circuits Overview 6-1
6.2 Creating Circuits and VT Tunnels 6-2
Procedure: Create an Automatically Routed Circuit 6-2
Procedure: Create a Manually Routed Circuit 6-6
6.3 Creating Multiple Drops for Unidirectional Circuits 6-8
Procedure: Create a Unidirectional Circuit with Multiple Drops 6-8
6.4 Creating Monitor Circuits 6-9
Procedure: Create a Monitor Circuit 6-9
6.5 Searching for Circuits 6-10
Procedure: Search for ONS 15454 Circuits 6-10
6.6 Editing UPSR Circuits 6-10
Procedure: Edit a UPSR Circuit 6-11
6.7 Creating a Path Trace 6-12
Procedure: Create a J1 Path Trace 6-13
6.8 Cross-Connect Card Capacities 6-15
6.8.1 VT1.5 Cross-Connects 6-16
6.8.2 VT Tunnels 6-19
6.9 Creating DCC Tunnels 6-21
Procedure: Provision a DCC Tunnel 6-22
CHAPTER 7 Card Provisioning 7-1
7.1 Performance Monitoring Thresholds 7-1
7.2 Provisioning Electrical Cards 7-2
7.2.1 DS-1 Card Parameters 7-3
Procedure: Modify Line and Threshold Settings for the DS-1 Card 7-3