- Cisco ONS 15454 Manual

Figures
xix
Cisco ONS 15454 Installation and Operations Guide
November 2001
Figure 6-16 Selecting DCC tunnel end points 6-23
Figure 7-1 Provisioning line parameters on the DS1-14 card 7-3
Figure 7-2 Provisioning thresholds for the OC48 IR 1310 card 7-19
Figure 7-3 IPPM provisioned for STS 1 on an OC-12 card 7-24
Figure 7-4 AIC alarm input and output 7-26
Figure 7-5 External alarms and controls using a virtual wire 7-27
Figure 7-6 Provisioning external alarms on the AIC card 7-28
Figure 7-7 Provisioning local orderwire 7-30
Figure 7-8 Viewing slot protection status 7-32
Figure 8-1 Viewing performance monitoring information 8-2
Figure 8-2 Time interval buttons on the card view Performance tab 8-3
Figure 8-3 Near End and Far End buttons on the card view Performance tab 8-5
Figure 8-4 Signal-type menus for a DS3XM-6 card 8-6
Figure 8-5 Baseline button for clearing displayed PM counts 8-7
Figure 8-6 Clear button for clearing PM counts 8-8
Figure 8-7 Threshold tab for setting threshold values 8-10
Figure 8-8 STS tab for enabling IPPM 8-11
Figure 8-9 Viewing pointer justification count parameters 8-12
Figure 8-10 Line tab for enabling pointer justification count parameters 8-13
Figure 8-11 Monitored signal types for the EC1 card 8-14
Figure 8-12 PM read points on the EC1 card 8-14
Figure 8-13 Monitored signal types for the DS1 and DS1N cards 8-18
Figure 8-14 PM read points on the DS1 and DS1N cards 8-18
Figure 8-15 Monitored signal types for the DS3 and DS3N cards 8-22
Figure 8-16 PM read points on the DS3 and DS3N cards 8-23
Figure 8-17 Monitored signal types for the DS3-12E and DS3N-12E cards 8-25
Figure 8-18 PM read points on the DS3-12E and DS3N-12E cards 8-25
Figure 8-19 Monitored signal types for the DS3XM-6 card 8-28
Figure 8-20 PM read points on the DS3XM-6 card 8-29
Figure 8-21 PM read points on the OC-3 card 8-34
Figure 8-22 Monitored signal types for the OC-12, OC-48, and OC-192 cards 8-37
Figure 8-23 PM read points on the OC-12, OC-48, and OC-192 cards 8-38
Figure 9-1 A gigabit interface converter 9-2
Figure 9-2 Provisioning Ethernet ports 9-3
Figure 9-3 A Multicard EtherSwitch configuration 9-4