- Cisco ONS 15454 Manual

Contents
xii
Cisco ONS 15454 Installation and Operations Guide
November 2001
9.4.1 Q-Tagging (IEEE 802.1Q) 9-22
9.4.2 Priority Queuing (IEEE 802.1Q) 9-23
9.4.3 VLAN Membership 9-24
Procedure: Provision Ethernet Ports for VLAN Membership 9-24
9.5 Spanning Tree (IEEE 802.1D) 9-26
9.5.1 Multi-Instance Spanning Tree and VLANs 9-26
Procedure: Enable Spanning Tree on Ethernet Ports 9-26
9.5.2 Spanning Tree Parameters 9-27
9.5.3 Spanning Tree Configuration 9-27
9.5.4 Spanning Tree Map 9-28
Procedure: View the Spanning Tree Map 9-28
9.6 Ethernet Performance and Maintenance Screens 9-28
9.6.1 Statistics Screen 9-29
9.6.2 Line Utilization Screen 9-29
9.6.3 History Screen 9-29
9.6.4 MAC Table Screen 9-30
Procedure: Retrieve the MAC Table Information 9-30
9.6.5 Trunk Utilization Screen 9-30
9.7 Remote Monitoring Specification Alarm Thresholds 9-30
Procedure: Creating Ethernet RMON Alarm Thresholds 9-32
CHAPTER 10 Alarm Monitoring and Management 10-1
10.1 Overview 10-1
10.2 Viewing ONS 15454 Alarms 10-1
10.2.1 Controlling Alarm Display 10-3
10.2.2 Viewing Alarm-Affected Circuits 10-3
Procedure: View Affected Circuits for a Specific Alarm 10-4
10.2.3 Conditions Tab 10-5
10.2.3.1 Retrieve and Display Conditions 10-5
10.2.3.2 Conditions Column Descriptions 10-6
10.2.4 Viewing History 10-7
10.2.5 Viewing Alarms on the LCD 10-8
Procedure: View Alarm Counts on a Specific Slot and Port 10-8
10.3 Alarm Profiles 10-8
10.3.1 Creating and Modifying Alarm Profiles 10-9
Procedure: Create an Alarm Profile 10-9
10.3.1.1 Alarm Profile Menus 10-10
10.3.1.2 Alarm Profile Editing 10-10
10.3.1.3 Alarm Severity Option 10-11