Bridge/Router Installation and Configuration Guide

7-7

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide

OL-11495-01

Chapter 7 Maintaining the Router

Removing and Installing the Front Covers and Bezel Extenders on Original Cisco 12000 Series Routers

Figure 7-2 Attaching the Bezel Extenders to a Card Cage Front Cover

Step 5 Hold the card cage front cover by its outside edges and align the ball studs with

the ball stud clips on the front of the chassis (

Figure 7-3).

1 Line card and RP card cage front cover (bezel) 3 Ball studs

2 Mounting screws 4 Right and left side bezel extender

93278