Bridge/Router Installation and Configuration Guide

3-49
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Chapter 3 Installing the Router
Installing the Front Cover of Cisco 12010 Enhanced Series Routers
Installing the Front Cover of Cisco 12010 Enhanced
Series Routers
Refer to Figure 3-27 and use the following procedure to install the front cover for
the Cisco 12010 enhanced series routers.
Step 1 Align the hinges on each side of the cover with the hinge connectors on each side
of the chassis (see blowout in
Figure 3-27).
Step 2 Push the front cover until the hinges snap into place.
Step 3 Repeat Step 1 and Step 2 for the remaining front cover.
1 Ball stud 2 Ball stud clip