Bridge/Router Installation and Configuration Guide

Chapter 3 Installing the Router
Connecting Power to the Power Shelf
3-42
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Step 1 Connect each AC power cord to the back panel of the power shelf and secure them
in place with their retention clips (
Figure 3-22).
Figure 3-22 Connecting AC Power Cords
Step 2 Plug each power supply cable into its AC outlet.
Connecting Power to the DC-Input Power Shelf
This section contains the procedures to connect the DC source power cables to a
DC-powered router.
The color coding of source DC power cable leads depends on the color coding of
the site DC power source.
28019
Power cord
retention clip