Switch User Manual
Table Of Contents
- Regulatory Compliance and Safety Information for the Catalyst Express 520 Switches
- Translated Safety Warnings
- Statement 17B-Overtemperature Warning
- Statement 43-Jewelry Removal Warning
- Statement 48-Stacking the Chassis Warning
- Statement 100C-Attaching the Cisco RPS (model PWR675-AC-RPS-N1)
- Statement 171-Ethernet Cable Shielding in Offices
- Statement 265-Redundant Power Supply Connection Warning
- Statement 266-Switch Installation Warning
- Statement 371-Power Cable and AC Adapter
- Statement 1001-Work During Lightning Activity
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1008-Class 1 Laser Product
- Statement 1017-Restricted Area
- Statement 1019-Main Disconnecting Device
- Statement 1024-Ground Conductor
- Statement 1028-More Than One Power Supply
- Statement 1030-Equipment Installation
- Statement 1040-Product Disposal
- Statement 1044-Port Connections
- Statement 1046-Installing or Replacing the Unit
- Statement 1071-Warning Definition
- Statement 1072-Shock Hazard from Interconnections
- Statement 1073-No User-Serviceable Parts
- Statement 1074-Comply with Local and National Electrical Codes
- Statement 1079-Hot Surface
- European Directives
- Regulatory Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- Switch Documentation Set
- Obtaining Documentation, Obtaining Support, and Security Guidelines
- Translated Safety Warnings
Regulatory Compliance and Safety Information for the Catalyst Express 520 Switches
Translated Safety Warnings
32
Regulatory Compliance and Safety Information for the Catalyst Express 520 Switches
OL-13012-02
Statement 1028—More Than One Power Supply
Warning
This unit might have more than one power supply connection. All
connections must be removed to de-energize the unit.
Statement 1028
Waarschuwing
Deze eenheid kan meer dan één stroomtoevoeraansluiting bevatten. Alle
aansluitingen dienen ontkoppeld te worden om de eenheid te ontkrachten.
Varoitus
Tässä laitteessa voi olla useampia kuin yksi virtakytkentä. Kaikki liitännät
on irrotettava, jotta jännite poistetaan laitteesta.
Attention
Cette unité peut avoir plus d'une connexion d'alimentation. Pour supprimer
toute tension et tout courant électrique de l'unité, toutes les connexions
d'alimentation doivent être débranchées.