Network Card User Manual

9
Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note
78-15893-06
Required Tools and Parts
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing. Statement 1034
Required Tools and Parts
These parts are included in the DFC3 daughter card upgrade kit:
• The DFC3A, DFC3B, or DFC3BXL daughter card
• Installation bracket and mounting hardware (mounts over the male standoffs at the rear of the DFC
daughter card)
• One disposable grounding wrist strap
• One MEM-XCEF720-1GB memory upgrade
Note The MEM-XCEF720-1GB memory upgrade is required for the DFC3BXL upgrade only and is included
as part of the DFC3BXL daughter card kit only.