Network Card User Manual

20
Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note
78-15893-06
Upgrading the DFC3BXL Daughter Card Memory
Removing the SODIMM
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
To remove the existing SODIMM, follow these steps:
Step 1 Attach an ESD grounding strap to your wrist and to ground. (If you are unsure about the correct way to
attach an ESD grounding strap, refer to the “Attaching Your ESD Grounding Strap” section on page 40
for instructions.)
Step 2 Locate the SODIMM on the module. (See Figure 10.)
Figure 10 Location of SODIMM on a WS-X67xx Module
WS-X5530
113340
S
TA
T
U
S
W
S
-X
6724-S
FP
24P
O
R
T G
IG
A
B
IT E
TH
E
R
N
E
T
- S
FP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 71 18 19 20 21 22 23 24
DDR SDRAM
SODIMM