Network Card User Manual

21
Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note
78-15893-06
Upgrading the DFC3BXL Daughter Card Memory
Step 3 Release the spring clips from the SODIMM, and release the SODIMM from the socket. (See Figure 11.)
Figure 11 Releasing the SODIMM Spring Clips
Step 4 When both ends of the SODIMM are released from the socket, grasp the ends of the SODIMM with your
thumb and forefinger, and pull the SODIMM completely out of the socket.
Caution SODIMMs are sensitive components that are susceptible to ESD damage. To prevent ESD damage,
handle SODIMMs by the edges only; avoid touching the memory modules, pins, or traces (the metal
fingers along the connector edge of the SODIMM). (See Figure 12.)
Memory module
Pull the tabs away with
your thumbs, bracing your
forefingers against the
rails. The memory module
will be released. Then raise
the memory module to
a vertical position.
51543