Bridge/Router Installation Guide

A-1
Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis Installation Guide
OL-10971-07
APPENDIX
A
Cisco CRS-1 4-Slot Line Card Chassis
System Specifications
This appendix provides the specifications for the Cisco CRS-1 Carrier Routing System 4-Slot Line Card
Chassis. It contains the following sections:
• Compliance and Safety Reference
• Cisco CRS-1 4-Slot Line Card Chassis Specifications
• Environmental Specifications
Compliance and Safety Reference
For information about the compliance and safety standards with which the Cisco CRS-1 router conforms,
see Cisco CRS-1 Carrier Routing System Regulatory Compliance and Safety Information.
Note Statement 273, Blower Handle Warning, is applicable only to the Cisco CRS-1 4-slot line card chassis.
Cisco CRS-1 4-Slot Line Card Chassis Specifications
Table A-1 lists the specifications for the Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis.
Ta b l e A-1 Cisco CRS-1 4-Slot Line Card Chassis Specifications
Physical Dimensions
Height 30 in. (76.2 cm)
Depth 30.28 in. (76.9 cm)
(including front doors)
Width 17.65 in. (44.8 cm)
Weight
Chassis with fan tray, power
shelf, and impedance carriers
installed (as shipped)
260 lb (117.9 kg), chassis only
338 lb (153.3 kg), chassis including packaging and pallet