Hub/Switch Installation and Configuration Guide

Installation 2-3
Site Preparation
Figure 2-2 Floor Mounting Hole Pattern (IPX 16/32)
Required Tools and Equipment
The following tools and equipment are required to install the IPX:
• Flat blade screwdriver set
• Phillips screwdriver set
• Grounding wrist strap
• DVM (digital voltmeter)
• Wrench (1") for raising and lowering cabinet feet
H8098
6.80"
(17.27cm)
8.40"
(21.37cm)
1.00"
(2.54cm)
24.45"
(62.10cm)
Cable entry
cutout
Cabinet rear
3/8" hole
7/8" access hole
(4 places)