Network Router User Manual

18-7
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 18 Configuring Interfaces
Configuring 622-Mbps SM and MM Interfaces
Default 622-Mbps ATM Interface Configuration without Autoconfiguration
If ILMI has been disabled or if the connecting end node does not support ILMI, the following defaults
are assigned to all 622-Mbps interfaces:
• ATM interface type = UNI
• UNI version = 3.0
• Maximum VPI bits = 8
• Maximum VCI bits = 14
• ATM interface side = network
• ATM UNI type = private
• Framing = sts-12c
• Clock source = network-derived
• STS stream scrambling = on
• Cell payload scrambling = on
• Reporting alarms = SF SLOS SLOF B1-TCA B2-TCA PLOP B3-TCA
• Path trace message = free format 64-byte string containing path information
• Scrambling = On
• BER thresholds: SF = 10e-3 SD = 10e-6
• TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6