Network Router User Manual

Index
IN-2
Cisco IOS XE Integrated Session Border Controller Configuration Guide for the Cisco ASR 1000 Series Aggregation Services Routers
OL-15421-01
differentiated services code point 5-3
diffserv package 5-5
discarded packets statistics 11-2
distributed model 1-2, 1-8
dropped calls 10-3
DSCP 5-3
two-rate three-color policing and marking 5-5
DTMF 11-3
interworking 3-1
dual-tone multifrequency 3-1
E
embedded services processor 10-2
enhanced root package 6-1
eroot package 6-1
ESP 10-2
event acknowledgment 11-3
events storage 11-3
event subscription 11-4
F
features, supported 1-4
firewall 8-2, 9-1
flexible address prefix provisioning 7-4
G
gate information package becomes optional 6-2
gate management/remote source address mask 8-4
gate management package 8-1, 8-5
ginfo package 6-2, 7-10
gm/rsam 8-4
GM package 7-4
H
H.248 address reporting package 8-2
H.248 association 11-3, 11-4
H.248 event notification 11-2
H.248 event subscription 11-4
H.248 logging 2-6
H.248 Megaco 1-8
H.248 packages 6-1
address reporting package 6-2
base root package 6-7
enabling optional H.248 packages 6-1
gate information package becomes optional 6-2
H.248.1v3 support 6-6
MGC-controlled gateway-wide properties 6-7
segmentation package 6-2
session failure reaction package 6-3
termination state control 6-4
traffic management package 6-6
VLAN package syntax-level support 6-6
H.248 protocol 1-8
H.248 services 11-6
audit support, extension 7-3
DBE signaling pinhole support 7-2
flexible address prefix provisioning 7-4
hairpin 7-5
local source properties (address and port) 7-5
MGC-specified local addresses or ports 7-6
multi-stream terminations 7-7
nine-tier termination name hierarchy 7-7
optional local/remote descriptors 7-10
remote source address mask filtering 7-11
RTP specific behavior support 7-11
ServiceChange Notification for Interface Status
Change
7-11
termination wildcarding support, extension 7-3
t-max timer 7-14
tsc-delay timer 7-14
H.248v3 7-7
hairpin
DBE restrictions
7-6
no NAPT pinholes 7-5