Network Card User Manual

Preparing for Installation 2-19
Rack-Mounting Considerations
Figure 2-10 Cisco 5814 Footprint and Outer Dimensions
Caution
To prevent the rack from tipping when installing the router in telco racks, ensure that the
rack is bolted to the floor and, if necessary, anchored with appropriate fixtures.
Caution To maintain a low center of gravity, ensure that heavier equipment is installed near the
bottom of the rack.
You are now ready to install the dial shelf in the rack. Proceed to the Installing the Dial Shelf in the
Rack section on page 3-6.
23.5 1n. ( 59.7 cm)
Chassis depth
17.5 in. (44.5 cm)
Chassis width
19 in. (48.3 cm) Chassis width
(including mounting flange)
H11039
Front
Rear