Network Card User Manual

Filter Module Specifications
Cisco AS5800 Specifications A-11
Output
Power output 2000W with a maximum configuration and one or two
AC-input power supplies
Voltage out (V
O) set point: –48.0 VDC
2
typical
Current out (I
O) rated: 0 to 41.6 amps DC; 2000W maximum
Output current limit
(steady state)
58.1 amps DC maximum
Efficiency 88% at full load, 240 VAC with ORing diode
DC-output stud torque 25 in. lb
Environmental Characteristics
Dimensions (H x W x D) 5.25 x 17.32 x 13.6 in. (13.32 x 44 x 34.5 cm)
Weight Per power supply: 11 lb (5 kg)
Empty power shelf: 14 lb (6.4 kg)
Heat dissipation 7755 Btu/hr
AC power cable supplied 12 American Wire Gauge (AWG), 16-amp
3
DC interconnect cable supplied 6 AWG, 2 pairs (black and red)
Storage temperature 25.8 to 185 °F (–40 to 85 °C)
Operating Temperature
(air inlet to power unit)
32 to 122 °F (0 to 50 °C) airflow front to back with
clearance for exhaust air in unpressurized enclosure
Acoustics 60 dBA typical; sound pressure level measured at 1 m
Humidity (noncondensing) 5 to 95%
Altitude –200 to 13,000 ft (-61 to 3,962 meters); derate at –7
°C/1000 ft above 8000 ft
Shock and Vibration Cisco Systems ENG-3396
ESD IEC1000-4-2
Reliability (at 25 °C, 220 VAC, 2000 W) 150k hours MTBF
Regulatory compliance
Agency approvals CE
UL
CSA
VDE
For compliance information see the Cisco AS5800
Universal Access Server Regulatory Compliance and Safety
Information document that shipped with your system.
1 VAC = volts alternating current.
2 VDC = volts direct current.
3 Each AC-input power supply requires a minimum of 15-amp service, with a 15-amp receptacle at the power source. The power cable
supplied with the Cisco AS5800 enhanced AC-input power shelf uses a 16-amp male plug.
Table A-13 Enhanced AC-Input Power Supply Specifications (continued)
Description Specification