Network Card User Manual

System Specifications
Cisco AS5800 Specifications A-3
Backplane Specifications
Table A-3 lists the backplane DC power specifications.
Regulatory Compliance
Agency approvals Safety: UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001,
AS/NZS 3260, IEC 950
Emissions: CFR 47 Part 15 Class A (FCC), CISPR22 Class B, EN55022
Class B, AS/NRZ 3548 Class B, ICES003, VCCI Class B
Immunity: IEC 1000-3-2, IEC 1000-3-3, IEC-1000-4-2, IEC-1000-4-3,
IEC-1000-4-4, IEC-1000-4-5, IEC-1000-4-6, IEC-1000-4-11,
EN50082-1, EN50082-2
For additional compliance information refer to the Regulatory Safety and
Compliance Information documents that shipped with your system.
1 Each AC-input power supply requires a minimum of 15A service, with a 15A receptacle at the power source. The power cable
supplied with the Cisco AS5800 AC-input power shelf uses a 16A male plug.
Table A-2 Router Shelf Network Processor Card DRAM SIMM Configurations
Total DRAM DRAM Bank 0 Quantity DRAM Bank 1 Quantity Product Number
128 MB U18 and U25 or
U11 and U25
2 32-MB SIMMs U4 and U12 or
U42 and U52
2 32-MB SIMMs MEM-NPE-128MB
Table A-3 Backplane—DC Power Requirements
Description Specification
Input voltage
Minimum
Minimum/Nominal
Nominal
Maximum/Nominal
Maximum
–20 (10 ms)
–38 VDC
–48 VDC
–72 VDC
–75 (IS)
Output voltage
Maximum
Nominal
Minimum
–38 VDC
–48 VDC
–75 VDC
Current 42 A
Minimum (SS)
Maximum (SS)
Peak (2 sec)
3 A
60 A
80 A
Circuit breaker 50 A
Table A-1 Cisco 5814 Dial Shelf Specifications
Description Specification