Universal Gateway Chassis Installation Guide

Index
IN-2
Cisco AS5350XM Universal Gateway Chassis Installation Guide
OL-6417-02
connecting an alarm to the alarm port 3-13
connecting a PC to console port 2-4
connecting a signal generator to the BITS port 3-12
connecting the auxiliary port to a modem (figure) C-4
connecting the console port to the PC (figure) C-2
connecting the console port to the terminal (figure) C-3
connecting the console terminal (figure) 3-11
connecting the DC power supply, single power
supply
B-13
connecting to a CSU/DSU (figure) 3-10
connecting to an E1 CSU/DSU (figure) 3-9
connecting to an Ethernet hub (figure) 3-7
connecting to a WAN 3-7
connecting to the auxiliary port 2-5
connecting to the BITS port (figure) 3-12
connecting to the network 3-6
Connections
preparing for network connections
2-3
T1 interface ports 3-7
WAN 3-7
connections, redundant power supply 3-17, B-4
connections, single power supply 3-16, B-3
console and auxiliary port pinouts and cables C-1
Console Port
adapter
C-3
connections 3-11
default settings 2-4
description 2-4
pinouts C-3
specification 1-5
console port cables and pinouts C-2
console port description 2-4
console port signaling and cabling using a DB-25 adapter
(table)
C-3
console port signaling and cabling using a DB-9 adapter
(table)
C-3
conventions, document viii
D
DC power supply
wiring
3-15
DC power supply connections (figure) 3-16
description, slot numbering 4-2
dial feature card (DFC), description 1-3
dimensions, Cisco AS5350 chassis 1-4
disconnecting fan tray power connector (figure) 4-7
disconnecting the power connectors from the backplane
(figure)
B-8
displaying environment status 4-3
document conventions viii
DTE device, connecting to the console port 2-4
E
electrostatic discharge (ESD), preventing 2-2
environment monitoring 4-2
environment status, displaying 4-3
equipment racks 3-3
error messages, compact flash A-6
Ethernet connections 2-4, 3-6
Ethernet port pinouts C-4
F
Fan Tray
caution
4-5
disconnecting power connector 4-7
installing 4-8
replacing 4-5
tightening screws 4-10
fan tray metal tabs (figure) 4-8
fan tray power connector (figure) 4-9
Figures
Attaching the Chassis to a 19-inch Rack
3-5
Attaching the Rubber Feet 3-3
Cisco AS5350 Chassis A-10