Universal Gateway Chassis Installation Guide

C-3
Cisco AS5350XM Universal Gateway Chassis Installation Guide
OL-6417-02
Appendix C Cabling Specifications
Console and Auxiliary Port Cables and Pinouts
Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)
to connect the console port to a terminal. Figure C-3 shows how to connect the console port to a terminal.
Table C-2 lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable,
and the RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL).
Figure C-3 Connecting the Console Port to a Terminal
Table C-1 Console Port Signaling and Cabling Using a DB-9 Adapter
Console Port (DTE) RJ-45-to-RJ-45 Rollover Cable
RJ-45-to-DB-9
Terminal Adapter Console Device
Signal RJ-45 Pin RJ-45 Pin DB-9 Pin Signal
RTS 1
1
1. Pin 1 is connected internally to pin 8.
88CTS
DTR276DSR
TxD362RxD
GND 4 5 5 GND
GND 5 4 5 GND
RxD633TxD
DSR724DTR
CTS 8
1
17RTS
Table C-2 Console Port Signaling and Cabling Using a DB-25 Adapter
Console Port
(DTE)
1
1. You can use the same cabling to connect a console to the auxiliary port.
RJ-45-to-RJ-45 Rollover Cable
RJ-45-to-DB-25
Terminal Adapter Console Device
Signal RJ-45 Pin RJ-45 Pin DB-25 Pin Signal
RTS 1
2
2. Pin 1 is connected internally to pin 8.
85CTS
DTR276DSR
TxD363RxD
GND 4 5 7 GND
GND 5 4 7 GND
RxD632TxD
DSR7220DTR
CTS 8
1
14RTS
Terminal
RJ-45-to-RJ-45
rollover cable
RJ-45-to-DB-25 adapter
(labeled TERMINAL)
37210
Universal gateway