Universal Gateway Chassis Installation Guide

B-11
Cisco AS5350XM Universal Gateway Chassis Installation Guide
OL-6417-02
Appendix B Replacing the Power Supply
Replacing the Chassis Cover
Figure B-13 Replacing the Air Separator
Step 4 Reinstall the power supply mounting screw.
Step 5 Replace the chassis cover using the procedures in the “Replacing the Chassis Cover” section on
page B-11.
Replacing the Chassis Cover
To replace the chassis cover, follow this procedure:
Step 1 Place the chassis bottom so that the front panel is facing you.
Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
the top rear of the chassis, as shown in Figure B-14.
Power
supply
36007
3
Chassis bottom
Front panel