Universal Gateway Chassis Installation Guide

B-7
Cisco AS5350XM Universal Gateway Chassis Installation Guide
OL-6417-02
Appendix B Replacing the Power Supply
Removing the Old Power Supply
Figure B-6 Removing the Mounting Screw on the Redundant AC Power Supply
Step 3
Turn the universal gateway so that the front panel is facing you.
Step 4 Lift the air separator out of the chassis. (See Figure B-7.)
Figure B-7 Removing the Air Separator
Note There are two power connectors on the power supply. One connects to the backplane and the
other to the system board. (See Figure B-8.)
82078
Mounting
screw
Power
supply
35692
3
Chassis bottom
Front panel