Universal Gateway Chassis Installation Guide

A-8
Cisco AS5350XM Universal Gateway Chassis Installation Guide
OL-6417-02
Appendix A Replacing Memory Components
Replacing the Chassis Cover
Step 8 Insert the new DIMM by sliding the end with the metal fingers into the DIMM socket, as shown in
Figure A-5.
Figure A-5 Inserting the New DIMM into the Socket
Step 9
Snap the latches into place. Do not use excessive force, because the socket might break.
Step 10 Replace the gateway chassis cover. (See the “Replacing the Chassis Cover” section on page A-8.)
Step 11 Power on the universal gateway. If error messages relating to memory are displayed, remove the DIMM
and reinstall it, taking care to seat the DIMM firmly in its socket.
Replacing the Chassis Cover
This section describes the procedure for replacing the chassis cover.
Required Tools and Equipment
• Medium Phillips screwdriver
• Five screws
35688