Network Router User Manual

31
Figure 9 LEDs
1
Status LED— Displays the current status of
the access point and power.
3
Radio 1 Status LED—Displays the status of
the 802.11b/g radio.
2
Uplink Status LED—Displays the status of all
uplink connections (Ethernet, fiber, and
cable).
4
Radio 2 Status LED—Displays the status of
the 802.11a radio.
Table 4 Access Point LED Descriptions
Color
1
Status LED Uplink LED RF-1 and RF-2 LEDs
Dark No power applied No physical connector
present or uplink port is
down.
Radio turned off
Green Access point operating
normally
Uplink ports operating
normally
Radios operating
normally
Blinking green Loading or upgrading IOS
image
––
Blinking amber Authentication mode – –
Amber Neighbor discovery – –