User's Manual

1-24
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 1 An Overview of the Cisco Unified IP Phones
Overview of Configuring and Installing Cisco Unified IP Phones
5. Customize softkey templates.
Adds, deletes, or changes order of softkey features
that display on the user’s phone to meet feature usage
needs.
See Cisco Unified Communications Manager
Administration Guide,
Softkey Template Configuration.
See Configuring Softkey Templates, page 5-27.
6. Configure speed-dial buttons and assign speed-dial
numbers (optional).
Adds speed-dial buttons and numbers.
Note Users can change speed-dial settings on their
phones by using Cisco Unified CM User
Options.
See Cisco Unified Communications Manager
Administration Guide,
Cisco Unified IP Phone
Configuration chapter, Configuring Speed-Dial Buttons
section.
7. Configure Cisco Unified IP Phone services and assign
services (optional).
Provides IP Phone services.
Note Users can add or change services on their
phones by using the Cisco Unified CM User
Options.
Note You must specify a service URL with an IPv4
address.
See these sections:
• See Cisco Communications Manager
Administration Guide,
Cisco Unified IP Phone
Services Configuration.
• See Setting Up Services, page 5-28.
8. Assign services to phone buttons (optional).
Provides single button access to an IP Phone service
or URL.
See Cisco Unified Communications Manager
Administration Guide,
Cisco Unified IP Phone
Configuration.
9. Add user information by configuring required fields.
Required fields are indicated by an asterisk (*); for
example, User ID and last name.
Note Assign a password (for User Options web
pages) and PIN (for Extension Mobility and
Personal Directory).
Adds user information to the global directory for
Cisco Unified
Communications Manager.
See Cisco Unified Communications Manager
Administration Guide,
End User Configuration.
See Adding Users to Cisco Unified Communications
Manager, page 5-28.
Note If your company uses a Lightweight Directory
Access Protocol (LDAP) directory to store
information on users, you can install and
configure Cisco
Unified Communications to use
your existing LDAP directory, see
Configuring
Corporate Directories, page 5-24.
Note If you want to add both the phone and user to the
Cisco Unified Communications Manager
database at the same time, see the
User/Phone
Add Configuration chapter in the Cisco Unified
Communications Manager Administration
Guide.
Table 1-7 Checklist for Configuring the Cisco Unified IP Phone 7962G and 7942G in Cisco Unified Communications
Manager (continued)
Task Purpose For More Information