User's Manual
Table Of Contents
- Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
- Contents
- Preface
- An Overview of the Cisco Unified IP Phones
- Understanding the Cisco Unified IP Phone 7962G and 7942G 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE
- What Networking Protocols are Used?
- What Features are Supported on the Cisco Unified IP Phone 7962G and 7942G?
- Understanding Security Features for Cisco Unified IP Phones
- Reducing Power Consumption on the Phones
- Overview of Configuring and Installing Cisco Unified IP Phones
- Preparing to Install the Cisco Unified IP Phones on Your Network
- Understanding Interactions with Other Cisco Unified IP Telephony Products
- Providing Power to the Cisco Unified IP Phones
- Understanding Phone Configuration Files
- Understanding the Phone Startup Process
- Adding Phones to the Cisco Unified Communications Manager Database
- Using Cisco Unified IP Phones with Different Protocols
- Determining the MAC Address for a Cisco Unified IP Phones
- Setting Up the Cisco Unified IP Phones
- Before You Begin
- Understanding the Cisco Unified IP Phone Components
- Installing the Cisco Unified IP Phones
- Attaching a Cisco Unified IP Phone Expansion Module
- Adjusting the Placement of the Cisco Unified IP Phone
- Verifying the Phone Startup Process
- Configuring Startup Network Settings
- Configuring Security on the Cisco Unified IP Phones
- Configuring Settings on the Cisco Unified IP Phones
- Configuration Menus on the Cisco Unified IP Phones
- Overview of Options Configurable from a Phone
- Network Configuration Menu
- Device Configuration Menu
- Unified CM Configuration Menu
- SIP Configuration Menu for SIP Phones Only
- Call Preferences Menu for SIP Phones
- HTTP Configuration Menu
- Locale Configuration Menu
- UI Configuration Menu
- Media Configuration Menu
- Ethernet Configuration Menu
- Security Configuration Menu
- QoS Configuration Menu
- Network Configuration Menu
- Security Configuration Menu
- Configuring Features, Templates, Services, and Users
- Telephony Features Available for the Cisco Unified IP Phone
- Configuring Product Specific Configuration Parameters
- Configuring Corporate and Personal Directories
- Modifying Phone Button Templates
- Configuring Softkey Templates
- Setting Up Services
- Adding Users to Cisco Unified Communications Manager
- Managing the User Options Web Pages
- Enabling EnergyWise on the Cisco Unified IP Phone
- Customizing the Cisco Unified IP Phones
- Monitoring the Cisco Unified IP Phones Remotely
- Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phones
- Troubleshooting and Maintenance
- Resolving Startup Problems
- Symptom: The Cisco Unified IP Phone Does Not Go Through its Normal Startup Process
- Symptom: The Cisco Unified IP Phone Does Not Register with Cisco Unified Communications Manager
- Identifying Error Messages
- Checking Network Connectivity
- Verifying TFTP Server Settings
- Verifying IP Addressing and Routing
- Verifying DNS Settings
- Verifying Cisco Unified Communications Manager Settings
- Cisco CallManager and TFTP Services Are Not Running
- Creating a New Configuration File
- Registering the Phone with Cisco Unified Communications Manager
- Symptom: Cisco Unified IP Phone Unable to Obtain IP Address
- Symptom: The Cisco Unified IP Phone Displays the Message Security Error
- Cisco Unified IP Phone Resets Unexpectedly
- Troubleshooting Cisco Unified IP Phone Security
- General Troubleshooting Tips
- General Troubleshooting Tips for the Cisco Unified IP Phone Expansion Module
- Resetting or Restoring the Cisco Unified IP Phones
- Using the Quality Report Tool
- Monitoring the Voice Quality of Calls
- Where to Go for More Troubleshooting Information
- Cleaning the Cisco Unified IP Phone
- Resolving Startup Problems
- Providing Information to Users Via a Website
- How Users Obtain Support for the Cisco Unified IP Phones
- Giving Users Access to the User Options Web Pages
- How Users Access the Online Help System on the Cisco Unified IP Phone
- How Users Get Copies of Cisco Unified IP Phone Manuals
- Accessing Cisco 7900 Series Unified IP Phone eLearning Tutorials for SCCP Phones Only
- How Users Subscribe to Services and Configure Phone Features
- How Users Access a Voice Messaging System
- How Users Configure Personal Directory Entries
- Feature Support by Protocol for Cisco Unified IP Phone
- Supporting International Users
- Technical Specifications
- Basic Phone Administration Steps
- Index

7-6
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 7 Monitoring the Cisco Unified IP Phones Remotely
Network Configuration
Unified CM 1–5 Host names or IP addresses, in prioritized order, of the Cisco Unified Communications
Manager servers with which the phone can register. An item can also show the IP address
of an SRST router that is capable of providing limited Cisco
Unified Communications
Manager functionality, if such a router is available.
For an available server, an item will show the Cisco Unified Communications Manager
server IP address and one of the following states:
• Active—Cisco Unified Communications Manager server from which the phone is
currently receiving call-processing services.
• Standby—Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable.
• Blank—No current connection to this Cisco Unified Communications Manager server.
An item may also include the Survivable Remote Site Telephony (SRST) designation,
which identifies an SRST router capable of providing Cisco
Unified Communications
Manager functionality with a limited feature set. This router assumes control of call
processing if all other Cisco
Unified Communications Manager servers become
unreachable. The SRST Cisco
Unified Communications Manager always appears last in
the list of servers, even if it is active. You configure the SRST router address in the Device
Pool section in Cisco
Unified Communications Manager Configuration window.
Information URL URL of the help text that appears on the phone.
Directories URL URL of the server from which the phone obtains directory information.
Messages URL URL of the server from which the phone obtains message services.
Services URL URL of the server from which the phone obtains Cisco Unified IP Phone services.
DHCP Enabled Indicates whether DHCP is being used by the phone.
DHCP Address Released Indicates the setting of the DHCP Address Released option on the phone’s Network
Configuration menu.
Alternate TFTP Indicates whether the phone is using an alternative TFTP server.
Idle URL URL that the phone displays when the phone has not been used for the time specified by
Idle URL Time, and no menu is open.
Idle URL Time Number of seconds that the phone has not been used and no menu is open before the XML
service specified by Idle URL is activated.
Proxy Server URL URL of proxy server, which makes HTTP requests to non-local host addresses on behalf of
the phone HTTP client and provides responses from the non-local host to the phone HTTP
client.
Authentication URL URL that the phone uses to validate requests made to the phone web server.
Table 7-2 Network Configuration Area Items (continued)
Item Description










