User's Manual

5-34
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 5 Configuring Features, Templates, Services, and Users
Enabling EnergyWise on the Cisco Unified IP Phone
Setting up UCR 2008
The parameters that support UCR 2008 reside in Cisco Unified Communications Manager
Administration. The following table describes the parameters and indicates the procedure to change the
setting.
Ta b l e 5-4 UCR 2008 parameter location
Configuring UCR 2008 in Phone
Use the following procedure to set the following UCR 2008 parameters:
• SSH Access
• Web Access
• HTTPS Server
Step 1 Choose Device > Phone.
Step 2 Set the SSH Access parameter to Disabled.
Step 3 Set the Web Access parameter to Disabled.
Parameter Administration Path Procedure
FIPS Mode Device > Device Settings > Common
Phone Profile
Configuring UCR 2008 in Common Phone
Profile, page 5-35
System > Enterprise Phone
Configuration
Configuring UCR 2008 in Enterprise Phone
Configuration, page 5-35
SSH Access Device > Phone Configuring UCR 2008 in Phone,
page 5-34
Device > Device Settings > Common
Phone Profile
Configuring UCR 2008 in Common Phone
Profile, page 5-35
Web Access Device > Phone Configuring UCR 2008 in Phone,
page 5-34
Disabling and Enabling Web Page Access,
page 7-3
HTTPS Server Device > Phone Configuring UCR 2008 in Phone,
page 5-34
System > Enterprise Phone
Configuration
Configuring UCR 2008 in Enterprise Phone
Configuration, page 5-35
80-bit SRTCP Device > Device Settings > Common
Phone Profile
Configuring UCR 2008 in Common Phone
Profile, page 5-35
System > Enterprise Phone
Configuration
Configuring UCR 2008 in Enterprise Phone
Configuration, page 5-35
IP Addressing Mode Device > Device Settings > Common
Device Configuration
Network Configuration Menu, page 4-34
IP Addressing Mode Preference
for Signaling
Device > Device Settings > Common
Device Configuration
Network Configuration Menu, page 4-34