User's Manual

4-32
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Device Configuration Menu
Security Configuration Menu
The Security Configuration that you access directly from the Settings menu provides information about
various security settings. It also provides access to the Trust List menu. The Trust List menu indicates
if the CTL or ITL files are installed on the phone.
Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For
information about the security options on that menu, see Security Configuration Menu, page 4-39.
Table 4-17 describes the options on the Security Configuration menu.
Ta b l e 4-17 Security Configuration Menu Options
Option Description To Change
PC Port Disabled Indicates whether the access port on the phone is
enabled (Yes) or disabled (No).
Must be set to enabled for video support on the
phone
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
GARP Enabled Indicates if the phone accepts MAC addresses
from Gratuitous ARP (GARP) responses.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Vo i c e V L A N
Enabled
Indicates whether the phone allows a device
attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN.
Setting this option also prevents the PC from
receiving data sent and received by the phone. Set
this setting to Yes (enabled) if an application that
requires monitoring of the phone’s traffic is
running on the PC. These applications include
monitoring and recording applications and
network monitoring software.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Web Access
Enabled
Indicates whether web access is enabled (Yes) or
disabled (No) for the phone.
For more information, see Disabling and Enabling
Web Page Access, page 7-3.
Security Mode Displays the security mode that is set for the
phone.
Use Cisco Unified Communications Manager
Administration to modify.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.