Integrated Services Router Installation Guide

Installing Memory and Power Over Ethernet in Cisco 880 Series Integrated Services Routers

OL-16194-01

Installing Main Memory

Figure 2 Removing a DIMM

Step 4

Align the DIMM to the DIMM socket and insert the DIMM into the DIMM socket at a 45-degree angle,

as shown in Figure 3.

Figure 3 Installing a DIMM

Step 5

Gently push the DIMM down toward the system board, as shown in Figure 3, until it snaps into the

spring-loaded clips.

Step 6 Close the chassis according to the instructions in “Closing the Chassis” section on page 10.

1 Spring-loaded clips 3 DIMM socket

2 DIMM

103155

1 DIMM 3 Spring-loaded clips

2 DIMM socket

103154