Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Contents • Cisco One-Year Limited Hardware Warranty Terms, page 1-2 • Locate the Product Serial Number, page 1-4 • Before Installation, page 1-4 • Connect the Antenna to the Wireless Router (Optional), page 1-8 • Connect the Power-over-Ethernet Module to the Cisco 870 Series Router (Optional), page 1-10 • Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers, page 1-12 • Connect the
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Cisco One-Year Limited Hardware Warranty Terms • Obtaining Technical Assistance, page 1-24 • Obtaining Additional Publications and Information, page 1-27 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Cisco One-Year Limited Hardware Warranty Terms c. Click Go. The Cisco warranty page appears. d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). You can also contact the Cisco service and support website for assistance: http://www.cisco.com/public/Support_root.shtml.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Locate the Product Serial Number Locate the Product Serial Number The serial number label for the router is located on the rear of the chassis, above the Ethernet LAN ports. (See Figure 1-1.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Before Installation Table 1-1 Items Shipped with Cisco 850 Series and Cisco 870 Series Routers Cisco 851 and Cisco 871 Item Ethernet cable (straight-through) 1 1 Cisco 857 and Cisco 877 Cisco 876 Cisco 878 1 1 1 2 3 13 DSL cable Not applicable 1 ISDN4 S/T cable Not applicable Not applicable Optional Optional 1 1 1 1 Optional Optional Optional Optional 1 1 1 1 1 1 1 1 1
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Before Installation Figure 1-2 Items Included with the Cisco 850 Series and Cisco 870 Series Routers 5 2 6 3 4 8 120730 7 1 Yellow Ethernet cable 5 Black power cord for adapter 2 Lavender DSL cable (optional) 6 Product documentation 3 Light blue console cable 7 Cisco SDM software CD 4 Router power adapter 8 Swivel-mount dipole antenna (wireless router models only) The following cable
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Before Installation Nonwireless Routers Portions of this guide do not apply to nonwireless models of the Cisco 850 series and Cisco 870 series routers. Some illustrations show the router with antennas attached, whereas the nonwireless routers do not have antennas or antenna connectors on the back panel.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Connect the Antenna to the Wireless Router (Optional) Connect the Antenna to the Wireless Router (Optional) The Cisco 850 series wireless routers support the use of a single 2.4-GHz antenna. (See Figure 1-3.) The Cisco 870 series wireless routers support the use of two 2.4-GHz antennas. (See Figure 1-4.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Connect the Antenna to the Wireless Router (Optional) Figure 1-4 Cisco 871 Wireless Router with Two Antennas Cisco 871W SN: XXXNNNNXXXX WAN LAN CONSOLE 1 RESET RIGHT / PRIMARY 0 FE0 FE1 FE2 FE3 FE4 AUX 122241 LEFT +5,+12 VDC To connect the antenna or antennas to a wireless router, follow these steps: Step 1 Attach each antenna to a reverse-polarity threaded Neill-Concelman (RP-TNC) connect
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Connect the Power-over-Ethernet Module to the Cisco 870 Series Router (Optional) Connect the Power-over-Ethernet Module to the Cisco 870 Series Router (Optional) Power-over-Ethernet (PoE) is supported on the Cisco 870 Series routers only. If you purchased a PoE module, connect all four Ethernet cables on the PoE module to the four LAN Ethernet ports on the Cisco 870 Series router. (See Figure 1-5.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Connect the Power-over-Ethernet Module to the Cisco 870 Series Router (Optional) Figure 1-5 Connecting the PoE Module to the Router 1 Cisco 871W SN: XXXNNNNXXXX WAN LAN CONSOLE 1 RESET LEFT RIGHT / PRIMARY 0 FE0 FE1 FE2 AUX FE4 FE3 +5,+12 VDC 2 7 PWR 0 1 2 To LAN 3 5 6 122351 3 4 1 Cisco 870 series router 5 Router power adapter 2 Ethernet cables on the PoE module (four RJ-45
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers Typical installations of the Cisco 850 series and Cisco 870 series routers are depicted in Figure 1-6 through Figure 1-9, as follows: • Cisco 851 and Cisco 871 router—See Figure 1-6. • Cisco 857 and Cisco 87 router—See Figure 1-7.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers Figure 1-6 Typical Installation of a Cisco 851 or Cisco 871 Router Cisco 871W SN: XXXNNNNXXXX WAN LAN CONSOLE 1 RESET LEFT RIGHT / PRIMARY 0 4 FE0 1 3 FE1 1 FE3 2 FE2 AUX FE4 3 2 4 +5,+12 VDC 5 1X 2X 1X 2X 1 1 Ethernet connection to an external switch 4 Console port 2 Ethernet connection to a PC 5 Pow
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers Figure 1-7 shows a typical installation of a Cisco 857 or Cisco 877 router.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers Figure 1-8 shows a typical installation of a Cisco 876 router.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers Figure 1-9 shows a typical installation of a Cisco 878 router. Figure 1-9 Typical Installation of a Cisco 878 Router Cisco 878W SN: XXXNNNNXXXX ISDN S/T LAN G.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Connect the Router Connect the Router Connect the router, referring to the typical installation for your router model as shown in the “Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers” section on page 1-12.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Connect the Router Follow the instructions provided with your broadband modem to determine which port on the modem to connect to. Turn on the broadband modem if it is not already turned on. Step 7 Cisco 871 router only: Connect supported USB devices such as flash memory modules or eTokens to the two USB ports.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Install SDM and Configure the Router Note Step 13 For Cisco 857, Cisco 876, Cisco 877, and Cisco 878 routers, the DSL line must have been provisioned by your service provider and must be correctly configured. Check the carrier detect (CD) status on the ADSL CD LED or G.SHDSL CD LED on the router. If the ADSL CD LED or G.SHDSL CD LED does not light up, check with your service provider.
Chapter 1 Related Documentation Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Related Documentation This document describes the basic process of cabling and setting up the Cisco 850 series and Cisco 870 series routers. See the following documents for more information: • Cisco 850 Series and Cisco 870 Series Access Routers Hardware Installation Guide—Provides detailed cabling and hardware information for the Cisco 850 series and Cisco 870 series routers.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Obtaining Documentation Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.
Chapter 1 Documentation Feedback Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Cisco Ordering tool: http://www.cisco.com/en/US/partner/ordering/ Cisco Marketplace: http://www.cisco.com/go/marketplace/ Ordering Documentation Beginning June 30, 2005, registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL: http://www.cisco.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Cisco Product Security Overview You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address: Cisco Systems Attn: Customer Document Ordering 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Obtaining Technical Assistance Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT: • Emergencies — security-alert@cisco.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Obtaining Technical Assistance service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Obtaining Technical Assistance solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. • Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL: http://www.cisco.
Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Obtaining Additional Publications and Information • Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL: http://www.cisco.
