Network Router User Manual

Installing the Router
Cisco 805 Router Hardware Installation Guide
2-6
Installing the Router
To install the router, perform the following tasks in the following order:
1 Connect an Ethernet device.
2 Connect a serial device.
3 Connect a terminal or PC (for software configuration or router troubleshooting).
4 Connect the power supply.
5 Mount the router.
6 Verify the router installation.
Connecting an Ethernet Device
You can connect the following devices to the Ethernet port:
A hub
A server, PC, or workstation with a 10- or 10/100-Mbps NIC
Table 2-1 lists the Ethernet devices you can connect to the router with the yellow Ethernet
cable and the appropriate settings of the router HUB/NO HUB button and the hub
equivalent of the HUB/NO HUB button. The default setting of the router HUB/NO HUB
button is HUB (in).