IP Phone User Manual
Table Of Contents
- Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP)
- Common Phone Tasks
- Quick Reference
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Basic Call Handling
- Placing a Call-Basic Options
- Placing a Call-Additional Options
- Answering a Call
- Ending a Call
- Using Hold and Resume
- Using Mute
- Switching Between Multiple Calls
- Switching an In-Progress Call to Another Phone
- Viewing Multiple Calls
- Transferring Calls
- Sending a Call to a Voice Message System
- Forwarding Calls to Another Number
- Using Do Not Disturb
- Making Conference Calls
- Placing or Receiving Intercom Calls
- Advanced Call Handling
- Speed Dialing
- Picking Up a Redirected Call on Your Phone
- Storing and Retrieving Parked Calls
- Logging Out of Hunt Groups
- Using a Shared Line
- Using BLF to Determine a Line State
- Making and Receiving Secure Calls
- Tracing Suspicious Calls
- Prioritizing Critical Calls
- Using Cisco Extension Mobility
- Managing Business Calls Using a Single Phone Number
- Using a Handset, Headset, and Speakerphone
- Using Call Logs and Directories
- Changing Phone Settings
- Accessing Voice Messages
- Using the Cisco Unified CM User Options Web Pages
- Accessing Your User Options Web Pages
- Configuring Features and Services on the Web
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
- Index
44 OL-16994-01
• Pressing OPickUp or Other PickUp or connects you to the call in the pickup group with the highest
priority.
• If you have multiple lines and want to pick up the call on a non-primary line, first press for
the desired line, then press a Call PickUp softkey or button.
• If you use the BLF Pickup feature on your phone, see “Using BLF to Determine a Line State”
section on page 49.
Storing and Retrieving Parked Calls
You can park a call when you want to store the call so that you or someone else can retrieve it from
another phone in the Cisco Unified Communications Manager system (for example, a phone at a
coworker’s desk or in a conference room).
You can park a call by using these methods:
• Call Park—Use the Park softkey to store the call. Your phone displays the call park number where
the system stored your call. You must record this number and then use the same number to retrieve
the call.
• Directed Call Park—Use the Transfer softkey to direct the call to an available directed call park
number that you dial or speed dial. To retrieve the call from a directed call park number, dial the
park retrieval prefix, then dial or speed dial the same directed call park number.
You can use a Directed Call Park button to speed-dial the directed call park number and to
monitor whether a directed call park number is occupied or available.
If you want to... Then...
Store an active call
using Call Park
1. During a call, press Park. (You may need to press the more softkey to
see Park.)
2. Note the call park number displayed on your phone screen.
3. Hang up.
Retrieve a parked call Enter the call park number from any Cisco Unified IP Phone in your
network to connect to the call.
Direct and store an
active call at a directed
call park number
1. During a call, press Transfer.
2. Press the Directed Call Park with the park-unoccupied icon to
speed dial the directed call park number.
A Directed Call Park (blinking) with park-occupied icon
indicates the directed call park number is not available.
3. Press Transfer again to finish storing the call.
Retrieve a parked call
from a directed call
park number
From any Cisco Unified IP Phone in your network, enter the park retrieval
prefix and dial the directed call park number. Or after entering the park
retrieval prefix, press the
(blinking) with to connect to the call.