Network Router User's Manual

Tag Switching Configuration Example
ATMSwitch Router Quick Software Configuration Guide5-8
Router 5-2 Configuration
The configuration between router R5-1, interface e0/1, and R5-2, interface e0/1, follows:
router_R5-2# configure terminal
router_R5-2(config)# ip cef switch
router_R5-2(config)# tag-switching advertise-tags
router_R5-2(config)# interface e0/1
router_R5-2(config-if)# tag-switching ip
router_R5-2(config-if)# exit
router_R5-2#(config)#
The configuration between router R5-2, interface e0/2, and R5-3, interface e0/2, follows:
route_R5-2(config)# interface e0/2
route_R5-2(config-if)# tag-switching ip
route_R5-2(config-if)# exit
The configuration of router R5-2, interface a2/0.1, follows:
router_R5-2(config-if)# interface a2/0.1
router_R5-2(config-subif)# ip address 189.26.11.15 255.255.0.0
router_R5-2(config-subif)# tag-switching ip
router_R5-2(config-subif)# no shutdown
router_R5-2(config-subif)# exit
router_R5-2(config)# interface a2/0
router_R5-2(config)# no shutdown
Router 5-3 Configuration
The configuration of router R5-3, interface e0/2, follows:
router_R5-3# configure terminal
router_R5-3(config)# ip cef switch
router_R5-3(config)# tag-switching advertise-tags
router_R5-3(config)# interface e0/2
router_R5-3(config-if)# tag-switching ip
router_R5-3(config-if)# exit
The configuration of router R5-3, interface e0/5 follows:
router_R5-3(config)# interface e0/5
router_R5-3(config-if)# tag-switching ip
router_R5-3(config-if)# exit