Network Router User's Manual

CHAPTER

Configuring Tag Switching 5-1

Configuring Tag Switching

This chapter describes how to configure tag switching, and includes the following sections:

• Software Restrictions

• Configuring Tag Switching on an ATM Switch Router

• Configuring Tag Switching on a Router

• Tag Switching Configuration Example

Note For more software configuration information about tag switching, refer to the

ATMSwitch Router Software Configuration Guide . Refer to the ATMSwitch Router

Command Reference publication for command syntax.

Software Restrictions

The software restrictions for tag switching follow:

• Open Shortest Path First (OSPF) is the only routing protocol currently supported.

• IP is the only network layer protocol currently supported.