Network Router User's Manual

Configuring LANE 4-17
Verifying Connectivity
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1000
ms
ATM_Switch# ping 172.16.0.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.0.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1000
ms
Displaying the LANE Client Configuration on the ATM Switch Router
The following example shows the show lane client command display for the Ethernet
LANE client in the ATM switch router:
ATM_Switch# show lane client
LE Client ATM0.1 ELAN name: eng Admin: up State: operational
Client ID: 3 LEC up for 4 minutes 58 seconds
Join Attempt: 1
HW Address: 0060.3e7b.2002 Type: ethernet Max Frame Size:
1516
ATM Address: 47.00918100000000603E7B2001.00603E7B2002.01
VCD rxFrames txFrames Type ATM Address
0 0 0 configure
47.00918100000000603E7B2001.00000C407575.00
52 1 4 direct
47.00918100000000603E7B2001.00000C407573.01
53 9 0 distribute
47.00918100000000603E7B2001.00000C407573.01
54 0 13 send
47.00918100000000603E7B2001.00000C407574.01
55 19 0 forward
47.00918100000000603E7B2001.00000C407574.01
56 11 10 data
47.00918100000000603E7B2001.00000C407572.01
57 6 5 data
47.00918100000000603E7B2001.00000C407C02.02
Switch#