Network Router User's Manual

Configuring LANE 4-15
Verifying Connectivity
Verifying Connectivity
The following example shows how to use the show lane and ping commands to confirm
the connection between the ATM switch router, routers, and LAN switches:
ATM Switch Router
Switch# show lane
LE Config Server ATM0 config table: eng_dbase
Admin: up State: operational
LECS Mastership State: active master
list of global LECS addresses (31 seconds to update):
47.00918100000000E04FACB401.00E04FACB405.00 <-------- me
ATM Address of this LECS: 47.00918100000000E04FACB401.00E04FACB405.00
(auto)
vcd rxCnt txCnt callingParty
82 2 2 47.00918100000000E04FACB401.00E04FACB403.01 LES
eng_elan 0 active
cumulative total number of unrecognized packets received so far: 0
cumulative total number of config requests received so far: 4
cumulative total number of config failures so far: 0
LE Server ATM0.1 ELAN name: eng_elan Admin: up State: operational
type: ethernet Max Frame Size: 1516
ATM address: 47.00918100000000E04FACB401.00E04FACB403.01
LECS used: 47.00918100000000E04FACB401.00E04FACB405.00 connected, vcd 81
control distribute: vcd 89, 2 members, 2 packets
proxy/ (ST: Init, Conn, Waiting, Adding, Joined, Operational, Reject,
Term)
lecid ST vcd pkts Hardware Addr ATM Address
1 O 88 2 00e0.4fac.b402
47.00918100000000E04FACB401.00E04FACB402.01
2 O 96 2 0080.1c93.8060
47.00918100000000E04FACB401.00801C938060.01
LE BUS ATM0.1 ELAN name: eng_elan Admin: up State: operational
type: ethernet Max Frame Size: 1516
ATM address: 47.00918100000000E04FACB401.00E04FACB404.01
data forward: vcd 93, 2 members, 95 packets, 0 unicasts
lecid vcd pkts ATM Address
1 92 95 47.00918100000000E04FACB401.00E04FACB402.01
2 97 42 47.00918100000000E04FACB401.00801C938060.01