Network Router User's Manual

ATMSwitch Router Quick Software Configuration Guidevi
Chapter 3 Configuring SVCs, PVCs, SoftPVCs, PVPs, and VPTunnels3-1
Configuring SVCs3-1
Configuring the Router3-2
Configuring Signaling on the Routers3-3
Configuring the IP Address and ESI Address3-4
Determining the NSAP Address3-6
Configure a Map Group and Map List3-7
Configuring PVCs3-9
Configuring the ATM Switch Router3-10
Configuring the Router3-12
Configuring Soft PVCs3-13
Configuring the ATM Switch Router3-14
Determining the Destination ATM Switch Router NSAP
Address3-15
Configuring the Source ATM Switch Router3-16
Configuring the Router3-17
Configuring PVPs3-19
Configuring VP Tunnels3-21
Chapter 4 Configuring LANE4-1
Understanding LANE on ATM4-2
Understanding LANE Components4-2
Implementing LANE4-3
Supporting LAN Protocols4-3
Addressing4-3
Assigning Components to Interfaces and Subinterfaces4-4
Configuring LANE Router and LAN Switch Requirements4-4
Configuring a LEC4-5
Configuring the LECS4-6
Configuring the ATM Address of the LECS4-6
Configuring the LECS Database4-7
Configuring the LES/BUS4-8