Network Router User's Manual

LANE Configuration Examples
ATMSwitch Router Quick Software Configuration Guide4-14
ATM# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
ATM(config)# interface atm 0
ATM(config-if)# atm pvc 1 0 5 qsaal
ATM(config-if)# atm pvc 2 0 16 ilmi
ATM(config-if)# end
ATM#
ATM# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
ATM(config)# interface atm 0.1
ATM(config-subif)# lane client ethernet 1 eng_elan
ATM(config-subif)# end
ATM# show lane client
LE Client ATM0.1 ELAN name: eng_elan Admin: up State: operational
Client ID: 3 LEC up for 24 seconds
Join Attempt: 11
HW Address: 00e0.4fac.b030 Type: ethernetMax Frame Size: 1516
VLANID: 1
ATM Address: 47.00918100000000E04FACB401.00E04FACB030.01
VCD rxFrames txFrames Type ATM Address
0 0 0 configure
47.00918100000000E04FACB401.00E04FACB405.00
27 1 14 direct
47.00918100000000E04FACB401.00E04FACB403.01
29 13 0 distribute
47.00918100000000E04FACB401.00E04FACB403.01
30 0 15 send
47.00918100000000E04FACB401.00E04FACB404.01
31 0 0 forward
47.00918100000000E04FACB401.00E04FACB404.01
ATM# copy system:running-config nvram:startup-config
Building configuration...
[OK]
ATM#