Network Router User's Manual

Configuring SVCs, PVCs, SoftPVCs, PVPs, and VPTunnels 3-23

Configuring VP Tunnels

Verify

When the VP tunnel is configured on both ends and the connection is up, the AutoCfgState

displays “completed.”

Switch# show atm interface atm 3/0/2.99

Interface: ATM3/0/2.99 Port-type: vp tunnel

IF Status: UP Admin Status: up

Auto-config: enabled AutoCfgState: completed

IF-Side: Network IF-type: NNI

Uni-type: not applicable Uni-version: not applicable

Switch#

Switch# show atm vp

Interface VPI Type X-Interface X-VPI Status

ATM3/0/2 99 PVP TUNNEL

Switch#