Network Router User's Manual

Where to Go Next
ATMSwitch Router Quick Software Configuration Guide1-10
Where to Go Next
Now that you have learned some CiscoIOS software basics, you can begin to configure the
ATM switch router.
Remember that:
• You can use the question mark (?) and arrow keys to help you enter commands.
• Each command mode restricts you to a set of commands. If you have difficulty entering
a command, check the prompt and then enter the question mark (?) for a list of available
commands. You might be in the wrong command mode or using the wrong syntax.
• If you want to disable a feature, enter the keyword no before the command; for example,
no atm router pnni.
• You need to save your configuration changes to NVRAM so that they will not be lost if
a system reload or power outage occurs.
Proceed to the next chapter, “Getting Started,” to begin configuring the ATM switch router.