Network Router User's Manual

Undoing a Command or Feature
ATMSwitch Router Quick Software Configuration Guide1-8
Undoing a Command or Feature
If you want to undo a command you entered or disable a feature, you can enter the keyword
no before most commands; for example, no atm router pnni.
Displaying the Configuration
You can display various aspects of the ATM switch router configuration by entering more
commands. You can only use more commands in user EXEC and privileged EXEC modes.
To display the current running (unsaved) configuration, enter the more
system:running-config command:
Switch# more system:running-config
Building configuration...
Current configuration:
!
version XX.X
<<Information omitted>>
!
line con 0
line vty 0 4
no login
!
end
To display the saved configuration (stored in nonvolatile random-access memory
[NVRAM]), enter the more nvram:startup-config command.