Network Router User Manual

3-53
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Linksets
– Status—Status change message generated.
– Trap—SNMP trap message generated.
You can customize this field. See the “Modifying the SGM Event
Configuration File (Solaris Only)” section on page 5-26 for more
information.
• Severity—Severity of the event. Default values are:
– Admin—The default color is cyan.
– Error—The default color is coral.
– None—The default color is white.
– Normal—The default color is light green.
– Warning—The default color is yellow.
You can customize this field. See the “Modifying the SGM Event
Configuration File (Solaris Only)” section on page 5-26 for more
information.
• Note—Indicates whether there is a note associated with the event.
• Time—Date and time the event was logged.
• Ack By—If you have not implemented SGM User-Based Access, name of the
device that last acknowledged the event.
If you have implemented SGM User-Based Access, name of the user who last
acknowledged the event.
If no one has acknowledged the event, this field is blank.
• Ack Time—Date and time the event was last acknowledged or
unacknowledged.
• Node—Name of the node associated with the event. If there is no node
associated with the event, None is displayed.
• SP—Name of the signaling point associated with the event. If there is no
signaling point associated with the event, None is displayed.
• Linkset—Name of the linkset associated with the event. If there is no linkset
associated with the event, None is displayed.