Network Router User Manual

3-371
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
Step 3 (Optional) If this is the first time you are using the sgm linkstats command to
generate a report, you must enter the command two more times:
• The first entry gets the first set of raw data.
• The second entry calculates begins calculating useful link and linkset
statistics.
• The third entry continues to calculate statistics, calculates long-term
averages, and, if the data being collected appears valid, begins generating the
report.
Thereafter, you need only enter this command once to generate the report.
Step 4 SGM generates the custom link and linkset statistics summary report and stores it
in the /custom directory, identified by its ID tag.
For example, if you entered the command:
# ./sgm linkstats sgm-2600a.cisco.com test1 -sls
SGM generates the following reports:
sgmLinkStats.custom.test1.2002-10-27.csv.zip
sgmLinksetStats.custom.test1.2002-10-27.csv.zip
If you installed SGM in the default directory, /opt, then the /custom directory is
located at /opt/CSCOsgm/reports/custom.
If you installed SGM in a different directory, or if you moved the report files
directory using the sgm repdir command, then the /custom directory is located in
that directory.
Step 5 For information on viewing the report, see the “Viewing the Custom Network
Statistics Export Files” section on page 3-379.